13
STATUS INDICATIONS
The LaundryPure 2 0 monitors its operations with a blue LED indicator:
• Unit on
= LED on steadily (“unit on” means whenever water is flowing
through the unit)
• ActivePure Cell replacement upcoming
(@ approx 7500 hours) =
periodic brief LED flash (visual chirp) when unit is off, but goes to steady
on when water is flowing through the unit
• ActivePure Cell replacement required
(@ approx 9000 hours) =
periodic brief LED flash (visual chirp) whether unit is off or on UV bulb
will NOT be turned on again until cell is replaced
• UV bulb failure
= periodic brief LED flash (visual chirp) – same as
ActivePure Cell replacement required above
• ActivePure Cell replacement:
When replacing the ActivePure Cell,
there is a switch on the main circuit board which must pressed When
this happens, the LED will blink 3 times (longer than the brief “chirp”
flashes above) and then shut off This indicates that the ActivePure Cell
timer has been reset to 0 Pressing the button at any time before the
7500 hour mark *or* before a bulb failure has been detected will NOT
reset the timer
• Leak Alarm:
LED will flash in conjunction with alarm beeping
If this occurs, please contact Customer Service at (800) 989-2299
for assistance
Electrical Shock Hazard Disconnect power before
attempting installation or service
Electrical Shock Hazard When working with electrical
connections, the appliance and surrounding area
should be clean and dry of any standing water Failure
to follow these instructions can result in death, fire, or
electrical shock
Do not operate LaundryPure 2 0 with the front cover
removed or improperly installed Failure to follow these
instructions can result in severe eye damage, death,
or electrical shock
WARNING:
CAUTION:
WARNING:
TEMPERATURE CONTROLLING WATER VALVES
Some washers monitor the incoming cold water temperature and adjust too cold of water by adding hot water, even if the water temperature is set to cold
If you have one of these washers, do not install with the “Y” adapter as it may cause the washer to not operate correctly Consult your washing machine
owner’s manual if needed
An optional LaundryPure 2 0 water tap allows you to run water with hydrogen and oxygen based oxidizers for cleaning surfaces, without the cost or
chemical irritants found in most traditional cleaning products (ActiveClean Port - 49693-US)
EXTERNAL WATER TAP
(AVAILABLE SEPARATELY)
Status Indicator Light
Circuit Board
