VOLKTEK NSH-580 MANAGED 24-PORT 10/100 + 4 G COMBO L3 SWITCH
8.3.21 SNMP
8.3.21.1 show rmon statistics
To show rmon statistics IFNAME status.
CLI Syntax:
show rmon statistics [IFNAME]
Example:
Switch#show rmon statistics fastethernet1/0/1
8.3.21.2 show snmp-server community
To show snmp-server community.
CLI Syntax:
show snmp-server community
Example:
Switch#show snmp-server community
8.3.21.3 snmp-server host
This command sets the SNMP host information.
CLI Syntax:
snmp-server host A.B.C.D
Example:
Switch(config)#snmp-server host 192.168.8.31
8.3.22 Filter
8.3.22.1 deny any host
Use this deny MAC access list configuration command on the switch to prevent non-IP
traffic from being forwarded if the conditions are matched. Use the no form of this
command to remove a deny condition from the named MAC access list.
CLI Syntax:
deny any host MACADDR [VLANID]
Example:
Switch(config)# mac access-list extended mac_acl
Switch(config-ext-macl)#deny any host c2f3.220a.12f4 1
8.3.22.2 filter set
This command defines an extended MAC access list using a name, and enter access-list
configuration mode.
CLI Syntax:
mac access-list extended WORD
Example:
Switch(config)#mac access-list extended mac_acl_1
96
