Figure 3.3
Figure 3.4
9
ATTACH THE REAR ASSEMBLY TO THE BODY
❶ Carefully turn the vehicle body over so the underside is
facing up. Figure 3.3
❷ Align the tabs coming from the rear body assembly with the
slots on the back of the vehicle body.
❸ Slide the two pieces together, making sure the holes in the
rear assembly are aligned with the holes in the vehicle body.
❹ Insert a screw into each hole location (eight total) and
tighten the screws into the vehicle body. Figure 3.4
❺ Insert a screw into each of the rear bracket hole locations
(two total), and tighten the screws into the vehicle body.
1
2
3
Two screws needed on
each side
of rear body.
4
4
5
4
4
4
4
4
4
Four screws needed in
the
middle
of the rear body.
Two small
screws needed
for rear bracket.
