Figure 3.1
Figure 3.2
8
3
Assembly
ATTACH THE REAR BRACKET
❶ Carefully turn the rear body assembly over so the underside
is facing up. Figure 3.1
Tip!
To keep from scratching the assembly pieces, place
on a soft surface such as the cardboard packaging.
❷ Insert the rear bracket into the bracket slot located at the
front of the rear assembly. Be sure the screw holes in the
rear bracket align with the screw holes in rear bracket slots.
❸ Insert a screw into each screw hole located on the rear
bracket slot (two total) and tighten the screws into the rear
assembly. Figure 3.2
1
2
3
Two rear
bracket screws
are needed for
this step.
