11
INSERT THE STEERING ROD
❶ Insert the long end of the steering rod through the steering
rod hole on the underside of the vehicle body up through
the steering wheel opening in the dashboard. Figure 3.8
❷ Insert the short, curved end of the steering rod through the
flat part of the front axle.
❺ Slide the dashboard assembly into the dashboard slots on
the vehicle body. Figure 3.7
❻ Connect the wires coming from the underside of the
dashboard assembly with the wires coming from the middle
of the vehicle body.
❼ Insert a screw into each of the holes located on the sides of
the dashboard assembly (two total), and tighten the screws.
Two screws are needed for this step.
Figure 3.7
Figure 3.8
7
7
5
5
6
2
1
Tip!
Insert a screw through the
hole at the end of the steering
rod to help keep it
from slipping out.
