Windows and Interior Locking
Windows
The driver’s side door in the ID.4 only features two window
switches, but can control all four of the vehicle’s windows.
Opening the rear windows on the ID.4
To open the rear windows in your ID.4:
1.
Tap the
REAR
control to activate operation of the rear power
windows. When activated, the control function light comes
on.
2.
To open the window, press the
switch. To close, pull the
switch.
3.
Briefly tap the
REAR
control again to deactivate rear window operation.
Note: If the REAR button is not pressed within about ten seconds after last use, control will return to the front windows.
Trunk Lid
Windows / Seats / Trunk Lid
Using the Child Lock
Press the control to deactivate the power window buttons in the rear doors. The electric child safety door lock is
switched on at the same time.
Interior Lock Button
When the lock button is illuminated yellow, the doors are locked. If the button is not illuminated, the doors are
unlocked.
Adjusting the Seats in your ID.4
Seat comfort in the ID.4 can be precisely tailored to meet the
needs of the driver, with six-way adjustable seats with power
recline, or 12-way power adjustable seats with memory and
massage, depending on trim level.
The driver and passenger seat will have a set of a controls
located on the sideboard of the seat.
1.
Slides the seat forward or back.
2.
Adjusts the backrest angle.
3.
Raises or lowers the seat cushion.
4.
Adjusts the 4-way lumbar (if equipped).
Memory Seats
1.
Adjust the driver’s seat and outside mirror positions to
your preferred positions.
2.
Press and release the
SET
button.
3.
Press and hold the Memory button 1 or 2 until the
chime sounds.
If your ID.4 comes equipped with the massage feature, it can
be turned on by pressing the switch that is located on the left
side of the seat, above the seat position controls. When the back
massage feature is switched on, the lumbar support moves and
massages the lumbar region of the back.
Note: Memory seat feature available on select trim lines and may vary depending on vehicle equipment. Memory seat buttons are located on the driver side.
Recalling Stored Memory Settings
•
With the vehicle stopped and the ignition ON, press and hold the corresponding memory button.
OR
•
With the ignition off and the driver’s door open, press the memory button until the stored position is reached.
Note: Personalization feature must be deactivated (Car > Settings > Personalization and ensure deactivated).
1
2
3
4
Seats
Adjusting the Trunk Lid Opening Angle
If the space behind or above the vehicle is not large enough to allow the trunk lid to open completely, you can change
how far the trunk lid opens.
1.
Interrupt the opening or closing process at the desired open position. It must be at least half open.
2.
Press and hold the
button in the trunk lid until the emergency flashers flash once and the vehicle makes an
audible alert.
3.
The adjusted opening angle is saved.
Easy Open/Easy Close
The trunk lid of the ID.4 can be raised and lowered hands-free,
for easy loading and unloading. To operate Easy Open, with the
vehicle key near the trunk:
1.
Position your foot behind the middle of the bumper.
2.
Quickly swing the lower part of your leg close to the bumper.
3.
Remove your foot quickly away from the sensor area.
4.
Visual feedback is given via the turn signals.
5.
The trunk lid will open.
To operate Easy Close, with the vehicle key near the trunk:
1.
Position your foot behind the middle of the bumper.
2.
Quickly swing the lower part of your leg close to the bumper.
3.
Remove your foot quickly away from the sensor area.
4.
A continuous chime will confirm successful activation.
5.
Walk away from the trunk area. The chime will continue as the trunk closes. All valid vehicle keys must be removed
from the area near the trunk lid for the operation to begin.
Image shows Drivers Door Controls (left hand drive vehicle).