Controlling Climatronic
To control the HVAC system, press the
button, located
beneath the infotainment screen and the temperature and
volume slider bars. Traditional controls are located under
Classic Climate tab.
1.
Fan
: Toggle the smaller or larger touch-sensitive keys to
decrease or increase fan speed, slide across the slider bar, or
simply touch the slider bar in the desired location.
2.
Temp Adjust via the Touchscreen:
For small adjustments, tap
the
+
and
-
buttons. For dramatic changes, press and hold
the temp number, then drag left (-) or right (+).
3.
Temp Adjust via the Slider Bar:
You can also use the slider bar to adjust the temperature, using the same
concept. Tap or slide your finger left for colder temperature and right for warmer.
4.
Temp Sync:
This function sets the 2-zone climate system to a consistent temperature, based on the driver zone
settings. Press the
SYNC
button located between the temperature displays.
5.
Seat and Steering Wheel Heating:
Tap icons within the climate screen to activate or adjust intensity. An Auto on
function is also available, located within the settings menu.
Smart Climate
The Smart Climate tab offers climate control shortcuts, which
automatically trigger the HVAC system to perform selected
actions.
•
: Clearing fog and ice from the windshield.
•
and
: Directing warm or cool air to the footwell.
•
: Directing warm air onto the steering wheel.
•
: Directing fresh air from outside into the interior.
•
and
: Temporarily increasing the heating or
cooling power.
Climate Control / Windshield Wipers
Warnings:
See
Windshield Wipers
in your Owner’s Manual for more detailed information and for important safety warnings.
Windshield Wipers
Intermittent/Rain-sensing
•
From the
OFF
position, move the wiper stalk one click down
to activate the intermittent wipers with rain-sensing.
•
The switch on top of the stalk varies the time interval
between each wipe.
•
The farther the switch is moved to the right, the shorter the
interval between each wipe will be.
Note: Ensure wiper stalk is in OFF position before entering a car wash.
Continuous
•
LOW
: From the
OFF
position, move the wiper stalk down two clicks.
•
HIGH
: From the
OFF
position, move the wiper stalk down three clicks.
Rear Wiper
To operate, push the lever one click away from you. If you have the front wipers on and you put the car in Reverse, the
rear wiper activates a single wipe.
Service Position
With the hood closed and drive system off, and within 30 seconds of powering off the vehicle, press and hold the
windshield lever upward. Wipers will move into the service position. Lift wiper arms up from windshield. Before
driving, fold wiper arms back onto the windshield. Turn the drive system
ON
, and press the wiper lever up briefly.
Wipers move back to the
Park
position.