24
9.
USER INTERFACE
It is possible to check and modify the operating parameters of the SmartCrystal™ Pro
Booster through its user interface.
The software interface is accessible from several supports:
The display on the SmartCrystal™ Pro Booster.
A remote computer by connecting to SmartCrystal™ Pro Booster connected
via Ethernet
A smartphone connected via WiFi to SmartCrystal™ Pro Booster
9.1.
Ethernet connection
For a wired connection, the SmartCrystal™ Pro Booster is connected to a computer
using a RJ45 network cable. The computer should be configured with an IP address
in the same sub-network as the SmartCrystal™ Pro Booster. Please refer to the user-
instructions "network settings" for your computer or ask your network administrator.
Using an internet browser, connect to the IP address of the Ethernet SmartCrystal Pro
™ Booster:
Default Ethernet Configuration:
Address: 192.168.2.123
Subnet: 255.255.0.0
9.2.
WIFI connection
Connect your computer, tablet or smartphone to the WIFI hotspot SmartCrystal™ Pro
Booster according to procedure for your equipment. Enter the password when
prompted.
From your web browser, connect to the WIFI address of SmartCrystal™ Pro Booster.
WIFI default configuration:
Hotspot Name: VOLFONI_xxxxx (xxxxx is the product serial number)
Password: Volfon1RD
Address: 10.10.0.1
