21
8.
USE THE SMARTCRYSTAL™ PRO BOOSTER
8.1.
Connections
For the installation it is necessary to use the external power cable supplied with the
system.
Once started, no cable should be connected or disconnected from
SmartCrystal™ Pro Booster.
Before making any change of the wiring configuration it is essential to wait for
a complete shut-down of the SmartCrystal™ Pro Booster using the ON / OFF
button and checking the LCD.
The first SmartCrystal Booster Pro ™ are delivered with a WiFi dongle
connected to one of its USB ports. The new devices have this WiFi
dongle directly integrated in the electronic board.
For the proper functioning of this product, it is essential to never disconnect
the WiFi dongle.
Connect the sync cable (BNC - BNC, BNC - 3 pin Mini DIN) between the 3D
sync output on the projector and the 3D Sync connector on the
SmartCrystal™ Pro Booster.
Plug-in the power cable and the Ethernet cable if necessary to the
SmartCrystal™ Pro Booster.
Turn the switch to ON
The connection of the system is shown in the following scheme:
1. 3D Sync Cable (BNC - BNC, BNC - 3 pin Mini DIN)
2. Power Cable
3. Ethernet Cable - Ethernet (if necessary)
