9 / 12
2 4 . M o v e t h e b o w s i e
as shown to adjust the
bended angle of the mast.
It should be bended little
like a bow as dotted line
s h o w n i n p i c t u r e , b u t
ensure it is a straight
center line between top
and bottom of mast.
25. Loosen the screw
and move the boomvang
to adjust the height of
the main boom(it is only
required when the cord tied
on SR1 is not at perfect
length).
Loosen this screw
23. Move the bowsie as
shown to tighten or loosen
the main sail.
LED
Bind Transmitter and Receiver
Binding is the process of programming the receiver to recognize
the GUID (Globally Unique Identifier) code of a single specific
transmitter. When a receiver is bound to a transmitter, the receiver
will only respond to that specific transmitter.
The yacht normally comes with bound Transmitter and Receiver. If
you need to rebind for any reason, please follow these steps:
1. With the transmitter switched OFF.
2. Power on the receiver, then turn on the transmitter within 5
seconds.
3. The receiver LED will flash for 3-8 seconds to bind automatically.
4. After the receiver LED stop flashing, it means the binding is done.
Antenna
Rudder Stick - Channel RUDD
Sail Stick - Channel THRO
Summary of Contents for Hurricane 791-2
Page 1: ......
