VOIspeed V-IP400P User Manual Download

Page: 5 / 37

VOI

SPEED

V-IP400P

VOI

SPEED

2 -

Introduction

Welcome to VOIspeed V-IP400P user manual. We would like to thank you for your

purchase and for having chosen one our products. This manual provides general

guidelines for a correct use of the product. In case you require further information on this

product or to receive technical assistance please visit our website:

www.voispeed.com

2.1 -

Security Information

Please read the security rules below. You should comply with these guidelines when

using this device. Please comply with these guidelines to avoid taking unnecessary risks.

Use the device only in the standard working position.

Any installations or repairs on the product should be carried out only by

qualified and fully trained personnel.

Use only accessories that are fully approved by The Manufacturer. Do not

connect to any non compatible products.

The device is not waterproof. Avoid contact with liquids.

If you connect the device to other devices please read the user guide of the

new equipment first. Do not connect the device to any non compatible

products.

Avoid prolonged exposure to direct sunlight. Do not place the device near

sources of intense heat (e.g. radiators, fire, etc.) and near electronic

equipment producing strong magnetic fields (speakers, microwaves ovens,

etc.). Do not install the device in humid rooms and avoid contact with

liquids. Do not expose the device to aggressive gas and do not use it in too

dusty environments. Never use the device in presence of any explosive gas

(e.g. methane). Refrain from opening any parts of the product and do not

touch the plugs with metal or sharp objects.

Please make sure that the power supply complies with the voltage setting of

your equipment. If you have any doubts about the voltage setting, please

Summary of Contents for V-IP400P






































Search results

Summary of Contents for V-IP400P

Reviews:

Related manuals for V-IP400P

Brands by name

Popular brands

VOIspeed V-IP400P, User Manual

Search results

Summary of Contents for V-IP400P

Reviews:

Related manuals for V-IP400P

Brands by name

Popular brands