Venu V2 Series User Guide V1.0
Page 60
Venu 215 V2 architectural specifications
The loudspeaker shall be active comprised of two high power 15” (304.8 mm) direct radiating,
reflex loaded low frequency (LF) transducers. The enclosure shall be rectangular constructed
from 15 mm multi-laminated birch plywood with two handles in the rear with a wraparound
grille and a rotating badge; it shall have a removable cover plate for fixing an optional M20 top
hat and shall be finished in a textured polyurethane with external dimensions of (H) 454 mm x
(W) 868 mm x (D) 636 mm (17.9” x 34.2” x 25”) and weigh 57 kg (125.7 lbs).
Performance specifications of a typical production unit shall be as follows: frequency response
of 38 Hz – 160 Hz (±3 dB from rated sensitivity); 1000 W long-term program per voice coil
using EIA RS-426A pink noise (6 dB crest factor); pressure sensitivity of 99 dB at one Watt 100
Hz – 10 kHz at one metre; rated nominal impedance of 4
:
.
The low frequency transducer shall be constructed on a cast aluminium frame with a treated
paper cone, 101.6 mm (4”) voice, wound with copper wire on a high-quality voice coil former
for high power handling and long-term reliability.
The wiring connection shall be as follows: a removable, lockable wiring connector with four
screw-down terminals (one pair for input and one pair for link through to another loudspeaker)
to provide secure wiring and allow for pre-wiring of the connector before the installation (this
connector should then screw lock to the enclosure for secure attachment). In addition, a
Neutrik speakON™ NL4 shall also feature.
The loudspeaker system shall be a Void Acoustics Venu 215 V2.
11 Appendix C: Architectural specifications
