Venu V2 Series User Guide V1.0
Page 57
Venu 112 V2 architectural specifications
The loudspeaker shall be comprised of one high power 12” (304.8 mm) direct radiating, reflex
loaded low frequency (LF) transducer. The enclosure shall be rectangular constructed from 15
mm multi-laminated birch plywood with a single handle in the rear with a wraparound grille
and a rotating badge; it shall have a removable cover plate for fixing an optional M20 top hat
and integral threaded inserts for the fitment of wall and ceiling mounting hardware; it shall be
finished in a textured polyurethane with external dimensions of (H) 378 mm x (W) 490 mm x
(D) 430 mm (14.9” x 19.3” x 16.9”) and weigh 27 kg (59.5 lbs).
The wiring connection shall be as follows: a removable, lockable wiring connector with four
screw-down terminals (one pair for input and one pair for link through to another loudspeaker)
to provide secure wiring and allow for pre-wiring of the connector before the installation (this
connector should then screw lock to the enclosure for secure attachment). In addition, a
Neutrik speakON™ NL4 shall also feature.
Performance specifications of a typical production unit shall be as follows: frequency response
of 40 Hz – 160 Hz (±3 dB from rated sensitivity); 600 W long-term program per voice coil
using EIA RS-426A pink noise (6 dB crest factor); pressure sensitivity of 96 dB at one Watt 100
Hz – 10 kHz at one metre; rated nominal impedance of 8
:
.
The low frequency transducer shall be constructed on a cast aluminium frame with a treated
paper cone, 101.6 mm (4”) voice, wound with copper wire on a high-quality voice coil former
for high power handling and long-term reliability.
The loudspeaker system shall be a Void Acoustics Venu 112 V2.
11 Appendix C: Architectural specifications
