Cleaning and routine maintenance
15
-Leave the dryer to cool down.
-Residual water may escape, place an absorbent
cloth under the maintenance flap.
1.Clean with water only; do not use
hard/sharp-edged objects!
Do not operate the dryer without the air condenser
!
Clean the lint filter
of drying time and consumption; therefore, the scrap
thread filter shall be cleaned after each use.
1.The lint filter accumulated on the filter will block the air circulation, which will cause the extension
2.Do disconnect the power cord before cleaning!
3.Do not operate the dryer without the lint filter !
4.Clean the lint filter after each use to prevent lint accumulation inside the dryer.
NOTE!
Wash air condenser
2.During drying, water may
and the seal,
collect between the window
but this does not affect the function of your dryer!
!
1.Unlock the maintenance flap.
2.Completely open maintenace flap.
3.Screw both locking levers towardas each other.
4.Pool out the air condenser.
Do not damage the air condenser!
5.Clean the air condenser completely, drain thoroughly.
6.Clean the seals.
7.Re-insert the air condenser, handle at the button!
8.Unscrew both locking levers.
9.Cloth the maintenance flap until it locks into position.
Please clean the air condenser approx, once every 3
Leave the dryer to cool down
1.Open the machine door.
2.Take out the lint filter, pull upward to take it out.
3.Clean the lint filter; wipe off the scrap threads
accumulated on the lint filter, with your hand or
rinse with water and dry thoroughly.
4.Reinstall the lint filter.
months if frequently used
.
