Specialty drying function
Specialty drying function
13
When the warm or cool or refresh programme is selected, the
【
Time
】
button can be used to adjust the
Used to adjust the dryness level of the laundry. The level has four grades .
The drying time increases 3 minutes in every grade.
2. Instruction of the
Time
function
【
】
drying time in 10 min. steps.
4. Instruction of the
function
【
My Cycle
】
Used to define and save your favorite proragmmes that are used frequently.
(
1).Use the programme selector to select the required programme and other drying functions.
(
2).Press and hold the
【
Intensity
】
button for 3 seconds until the
and the required programme
beep
(3).Except the
【
Cotton Iron
】【
Qucik
】【
Synthetic Iron
】 【
Baby Care
】【
Warm
】【
Cool
】【
Refresh
】,
(2).Press the
【
Intensity
】
button repeatedly to select the drying time.
(1).The intensity function can be activated only before the programme start.
(
3).Turn the programme selector to the
【
My Cycle
】
position, you can start your favorite proragmmes.
1. Instruction to the
drying procedure
【
Delay
】
Steps in details
(1).Load your laundry and make sure the machine door is closed.
(2).Press the
【
On/Off
】
button,then to turn the programme selector knob and select a desired
(3).You can select the
【
Anti-Crease
or
【
Signal
】
functions according to your
】
need.
(4).To press the
【
Delay
】
key.
(5).Continue to press the
【
Delay
】
to select the delay time.
(6).After the
【
Start/Pause
】
is pushed, the dryer is at the run condition.
button
The drying procedure
will be automatically performed when the delay time is over.
(7).If you push the
【
Start/Pause
】
button again, the delay function will be paused.
(8).If you want to cancel the “Delay” function, please press the
【
On/Off
】
button.
programme.
3. Instruction of the
Intensity
function
【
】
all the other programmes can be setted the
【
Intensity
】
function.
has been saved.
If you want to change the
【
My Cycle
】
settings, repeat the steps (1) and (2).
To delay the drying programme from 0 hour to 24 hours. The delay time means the programme
will start after x hours. When the delay programme starts, the time starts to decrease on the
display and the icon blinks.
