
6TJOHZPVS'SFFTUBOEJOH$PPLFS
Getting the most from your appliance
*OTUSVDUJPOTGPSVTF IPCUPQCVSOFST
The symbols on the control knobs mean
the following:
N
Maximum gas flow or ‘high’ flame and
lighting position
Minimum gas flow or ‘low’ flame
All operating positions must be set between the
maximum and minimum flow settings, and never
between the maximum setting and the closed
position.
(BT#VSOFS$PNQPOFOUT
A
Burner cap
B
Burner Head
C
Burner Bowl
D
Thermocouple (where fitted)
E
Electrode
$POUSPMT
$POUSPMLOPC )PCUPQ#VSOFST
These parts can be removed for cleaning
periodically. After cleaning, they must be well
dried and correctly replaced. It is important to
check that the burner bowl and cap have been
correctly positioned. Failure to do so can cause
serious problems.
6QQFSMPXFSMFGUDBWJUZ
6QQFSMFGUGVODUJPOBOEUFNQFSBUVSFLOPC
-PXFSMFGUGVODUJPOLOPC
-PXFSMFGUUFNQFSBUVSFLOPC
6QQFSSJHIUDBWJUZ
6QQFSSJHIUGVODUJPOLOPC
6QQFSSJHIUUFNQFSBUVSFLOPC
Summary of Contents for 310180
Page 28: ...Version A 0 Revision 20 03 ...