Vogue 310180, Installation Instructions & User Manual, Page: 14 / 28

*OTUBMMJOHZPVS'SFFTUBOEJOH$PPLFS
Bringing it all together
(BT$POWFSTJPO /(UP6-1(
$0/7&34*0/50"%*''&3&/5("45:1&.645#&
$"33*&%065#:"46*5"#-:26"-*'*&%("44"'&
3&(*45&3&%*/45"--&3
$IBOHJOHUIFKFUT
1. Remove pan supports, burner heads and caps.
2. Use a size 7 socket wrench to unscrew and remove
the jets, replacing them with those supplied in the
conversion kit. Ensure you use the correct jet for the
corresponding burner.
3. Reassemble the burner heads, caps and pan
supports.
4. Fit the Gas type label supplied in the conversion kit
next to the gas connection point and remove the
existing label.
4FUUJOHUIFNJOJNVNMFWFM
1. Light one of the burners and turn the tap to
minimum flame.
2. Remove UIF control knob XIJDIDPOUSPMTUIFJHOJUFE
CVSOFS
3. Use a thin blade screwdriver to turn the by-pass
screw located above left of the gas valve shaft as
shown
CFMPX . Turn the by-pass screw fully
clockwise. The result should be a small, stable flame
which is uniform around the entire burner ring. If not,
turn the by-pass screw anti-clockwise until satisfied
with the flame.
4. Check that the burner does not go out when the tap
is turned quickly from the maximum to the minimum
position.
5. Repeat for each burner.