Safet y
14
WBV.PU.003.EN FX116 V1.0
WARNING
Skin and eye irritation caused by contact with hazardous working materials or media!
All work on the machine can lead to contact with working materials or media.
•
Personnel must wear suitable protective clothing.
•
The operator must inform his or her staff about any potentially hazardous substances in working
materials or media.
CAUTION
Risk of burning due to exposed host surfaces!
If the medium temperature is greater than 60 °C or the pump experiences dry running, the pump housing,
the connectors or the pipes can become very hot.
At high speeds or high differential pressure, the gearbox housing can also become very hot.
•
Avoid (accidental) contact with hot surfaces.
•
Avoid dry running of the pump, e.g. by means of dry running protection via
Temperature monitor
Level measurement
Flow measurement
ATTENTION
Risk of frost!
To protect the pump against damage caused by frozen medium, drain it when there is a risk of frost.
•
Drain the pump by running the pump in either direction (forward or reverse), until all liquid is drained
out of the pump. You can use drain cocks in the connectors to do this.
•
To completely drain the pump chamber, remove the bearing housing.
•
Before start-up, refill with fluid.
