www.vogels.com
1
2
48
7
6
5
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
PFW 6850
Take the plastic depth straw supplied and confirm the overall
“safe” screw depth that can be used.
Re-install the front wall arm plate to the arm with the three
M5 flat head screws you set aside earlier. Confirm screws
are fully seated and tight.
Wood Stud
Leveler
1/2”
x4
x4
Raise the PFW 6850 assembly so the mounting slots
are over the four drilled mounting holes. Confirm mount
level with spirit level and secure the mount to the wall
surface with the four each 5/16” x 3” (76mm) lag bolt
and 5/16” flat washer supplied.
Level the wall mount in the following order on figure 5
and below
Re-confirm secured assembly is level horizontally and
vertically or level again if necessary before proceeding.
NOTE: Do not over tighten lag bolts
Concrete Wall
Leveler
1/2”
x4
x4
x4
1. Level the wall mount in following order on figure 6
and below.
2. Mark the pointing points.
3. Drill the concrete wall using a 3/8” concrete drill bit.
4. Lighty hammer the four (4) Finned Anchors into the wall.
5. Tighten the (4) 5/16” washers and (4) 5/16” x 3” (76mm) lag
bolts into the wall.
