Page: 7 / 28
© 2016 by Vogel & Plötscher GmbH & Co. KG | RCAD | Version 2.0 | 25.01.2015
3. Start-up
3.1 Safety instructions
RCAD is a state-of-the-art system, assuring a high degree of reliability.
However, that reliability can only be attained in practice if all the necessary measures are
taken. It falls within the duty of care of the company operating the measuring device to en-
sure that those measures are taken, and to monitor their implementation.
The operating company must in particular ensure that…
1.
The measuring device is used only in accordance with its intended purpose.
2.
The measuring device is only operated in perfect working condition.
3.
The measuring device is only operated by adequately qualified and authorised personnel.
4.
This user manual is available at the place of use, and is readable and complete.
3.2 Preparations
To ensure correct and proper operation of the measuring device, observe the following
points:
§
All device components are in correct and proper condition and undamaged.
§
The batteries are fully charged and/or charged replacement batteries available.
3.2.1 Initial start
Press and hold the ON/OFF-button for about 1 second. The display will show the message
“ON” and afterwards the current track gauge value.
3.2.2 Illumination
After the device has been switched on, press ON/OFF-button again for enabling (or disa-
bling) the background illumination of the display.
The measuring device must be checked for visible damage prior to every
measurement. It must be ensured that the measuring device is operated
only when in proper working order.
Summary of Contents for RCAD
Page 1: ......
Page 2: ......
Page 3: ... 2016 by Vogel Plötscher GmbH Co KG RCAD Version 2 0 25 01 2015 User Manual RCAD ...
