Page: 4 / 28
© 2016 by Vogel & Plötscher GmbH & Co. KG | RCAD | Version 2.0 | 25.01.2015
1. Introduction
1.1 Intended use
RCAD is an electronic track and switch measurement device for checking vignole and
grooved rails on railways. In general the following parameters can be measured:
§
Track gauge
§
Check rail gauge
§
Flangeway clearance
§
Back-to-back distance
§
Cant
Depending on the technical design and configuration options, RCAD can be used to measure
and record a range of different measurement variables. Data is acquired within the specified
measuring ranges and tolerances (
à
chapter 6).
Users must be properly trained and qualified to use the measurement device. Consequently,
users are advised to undergo a practical induction course by V&P or someone authorised by
V&P to supplement the information provided in this user manual.
1.2 Standard supply package
1 x
Digital measuring device RCAD
2 x
Rechargeable batteries type AA
1 x
User manual
If RCAD is not used in accordance with this requirement, safe operation of the
measurement system cannot be guaranteed. Users themselves, not V&P, are re-
sponsible for any resultant injury or damage to property.
Summary of Contents for RCAD
Page 1: ......
Page 2: ......
Page 3: ... 2016 by Vogel Plötscher GmbH Co KG RCAD Version 2 0 25 01 2015 User Manual RCAD ...
