background image

76

Personalized Messages

To cancel a pre-assigned message:

1.

Either dial the Personal Messages code [633] + [00], dial 
[662], or press the DND button.

2.

Replace the handset. The DND button LED will extinguish.

Custom Messages

Each station can select from ten possible custom messages to 
display on the LCD of a key telephone calling that station. 
These messages are programmed from the first attendant 
station for system-wide use.

Each station can also program three unique custom messages.

To select a custom message:

1.

Dial [633] on the dial pad, 

-or-

Press a 

preprogrammed

 PERSONAL MESSAGES button.

2.

Dial a valid message number (21-30) for the desired custom 
message.

The first Attendant should provide a list of messages to 
each station user.

To program a unique custom message:

1.

Dial [633] on the dial pad.

2.

Dial a valid message number (18-20) for the desired custom 
message.

3.

Enter a custom message, up to eight characters.

4.

Press the HOLD button to save the message.

The Custom Messages feature is not available for use 
by attendant stations.

Summary of Contents for Triad Station

























































































































Reviews: