Vodavi Triad Station User Manual Download

Page: 31 / 120

Attendant Features

Attendant Features

If your station is designated as the attendant station, the
following features are available to assist you in efficiently
operating your telephone.

Attendant Clear Alarm

The attendant can dial feature code [606] to clear any alarm.
This function does not clear the condition, only the display.

Attendant CO Line External (Off-Net) Forward

To activate off-net forwarding:

Dial [603] on the dial pad,

-or-

Press the

preprogrammed

CO OFF-NET FORWARD button.

Dial the CO group access code of group to be forwarded:

[801-823] = CO Group 1-23

[824] = All CO Groups

Dial the speed bin number that contains the number where
calls are to forward. A confirmation tone will sound.

To cancel off-net forwarding:

Dial [603] on the dial pad,

-or-

Press

preprogrammed

CO OFF-NET FORWARD button.

Dial the CO group access code.

Dial [#] on the dial pad. A confirmation tone will sound.

Summary of Contents for Triad Station

























































































































Search results

Summary of Contents for Triad Station

Reviews:

Related manuals for Triad Station

Brands by name

Popular brands

Vodavi Triad Station, User Manual

Search results

Summary of Contents for Triad Station

Reviews:

Related manuals for Triad Station

Brands by name

Popular brands