Vodavi Triad Station User Manual Download

Page: 85 / 120

Night Service

SINGLE

LINE

TELEPHONE

To create your name:

Dial [690] on the dial pad.

Enter the name (up to 7 characters may be entered) by
using keys on the dial pad.

Briefly depress the hookswitch and release to complete the
programming process.

To erase your name:

Dial [690] on the dial pad.

Briefly depress the hookswitch and release to erase.

Night Service

To enter Night Service Mode, from an idle station:

Press the

preprogrammed

NIGHT SERVICE flexible button

[604]. The system is now in the Night Service Mode.

To remove Night Service Mode:

Press the

preprogrammed

NIGHT SERVICE flexible button

[604] again. The system is now removed from the Night
Service Mode.

❑

Flex

Btn

Summary of Contents for Triad Station

























































































































Search results

Summary of Contents for Triad Station

Reviews:

Related manuals for Triad Station

Brands by name

Popular brands

Vodavi Triad Station, User Manual

Search results

Summary of Contents for Triad Station

Reviews:

Related manuals for Triad Station

Brands by name

Popular brands