VocoPro UHF-18, Owner'S Manual

Page: 14 / 16

There is no power
• If using the UHF-18 as a plug-in module, make sure the IfIf connector cable is fi rmly attached.
• Make sure the UHF-18 is turned on by turning the Power/Volume knob clockwise.
• Make sure all of your components are turned on.
• When using the UHF-18 as a stand alone unit, make sure the power adapter is plugged in.
There is no sound
• Make sure everything is connected fi rmly and properly.
• Make sure all of your components are turned on.
• Make sure the mic is switched on, and not switched to mute.
• Adjust the volume knob on the wireless module.
• Make sure the microphone batteries are charged and installed correctly.
Troubleshooting
14