VocoPro UHF-18, Owner'S Manual

Page: 12 / 16

12
Descriptions and Functions
� � � � �
1. BNC Antenna Connector - Connect the antenna here. To attach, press and twist clockwise until the connector latches.
To detach, press and twist counter-clockwise.
2. RF Indicator LED - This LED will turn on when the UHF-18 detects a wireless signal from the wireless microphone.
(When the wireless microphone is switched on)
3. AF Indicator LED - This LED will turn on when the UHF-18 detects an audio signal from the wireless microphone.
(When the wireless microphone is spoken or sung into)
4. Power Indicator LED - This LED will turn on when the UHF-18 is powered on.
5. Power/Volume Dial - This dial will turn on the UHF-18. Turn the dial clockwise, it will click, turning the unit on. When the
UHF-18 is on, this dial is used to adjust the volume of the wireless mics. Turn the dial clockwise to increase the volume
and counter-clockwise to de and counter-clock and counter-clock crease the volume. To turn the UHF-18 off, turn the dial completely counter-clockwise until it
clicks.
� � �
Rear Panel
1. Power Connector - When using the UHF-18 as a stand-alone unit, connect the power adapter here. When using the
UHF-18 as a plug-in module, this plug is not used.
NOTE: Plugging in the power adapter when using the UHF-18 as a plug-in module may result in damage to the UHF-18.
2. 1/4” MIC OUT Jack - When using the UHF-18 as a stand-alone unit, connect a cable from this jack to the mic input on
your mixer or other device. When using the UHF-18 as a plug-in module, this plug is not used.
3. Multi-Purpose Plug - When using the UHF-18 as a plug-in module, connect the multi-purpose cable from the plug-in slot
to this plug. When using the UHF-18 as a stand-alone unit, this plug is not used.