VocoPro UHF-18, Owner'S Manual

Page: 10 / 16

10
Getting Connected
Using the UHF-18 as a stand-alone unit
The UHF-18 can be used with any device that has a 1/4” mic input.
To connect the UHF-18:
1. Use a 1/4” patch cable to connect the UHF-18 mic out to the 1/4” mic input on you mixer or other device.
2. Connect the power adapter cable to the DC power input of the UHF-18 and plug the adapter into the power source. A
surge protector is recommended.
����� ����� ����� ����� ���� ������ ���� ��� ���� ���� ������� ��� ����
���������� ��������� ���������� ������ ��������
����������������������������
���������������������������
�������������������
������������������������������������
�����������������������
���������������
Use the power adapter only when using the UHF-18 as a stand alone unit as shown above. Connecting the power
adapter when using the UHF-18 as a plug-in module may result in damage to the UHF-18.