18
Troubleshooting
Files are being recorded but there is no sound.
Check your input devices and connections. (see Operations section)
Check the recording level (see Operations section)
Recording level is either too high or low.
Re-adjust the recording level (see Operations section)
Check the playback level of your source device.
Sound is distorted.
Check the incoming signal from the source device. If this is a mixer, check the outputs and make
sure they are not too high.
Check the recording level (see Operations section)
No audio output from the SDR-3000.
Check the output connections on the back of the SDR-3000 and connected devices. (see
Operations section)
Check to make sure the output toggle is set correctly. (see Operations section)
Files are not recording to SD card/USB drive.
Check SD card and USB drive on computer to make sure it is working properly.
