25
Wireless Module Operations
Setting Up
For each UHF wireless channel, you will have a handheld microphone, wireless module, and antenna. Follow
the steps below to set them up.
Module Installation
1. Unscrew the two retaining screws.
2. Remove the cover plate and store it in a safe place.
3. Fully insert the wireless module so the module is flush with the faceplate of the MOBILEMAN.
4. Replace and tighten screws.
Removing Modules
1. Unscrew the two retaining screws.
2. To remove, simply slide the module out of the compartment.
3. Align the cover plate, and tighten screws.
Antenna Installation
Insert the antenna’s TNC connector into the corresponding channel’s TNC antenna jack and twist clockwise
until it is firmly connected. If installing multiple antennas, ensure the antennas are not touching each other.
0
R
Antenna
Connector
