16
Descriptions and Functions
Top Panel
1.
UHF MODULE ports
– Install optional UHF wireless modules in these ports. (For details on operating UHF wireless
channels, please refer to page 23.)
NOTE: Depending on the MOBILEMAN system purchased, your unit may have UHF modules installed already. For
instructions on installing a UHF module refer to page 25.
2.
UHF POWER switch
– Use this switch to turn the power to the UHF wireless modules ON/OFF.
NOTE: When running on battery power, in order to conserve battery life, it is recommended turn off power to
installed UHF modules when they are not being used.
3.
EFFECT MONO/STEREO button
– Use this button to switch between mono and stereo modes when using the echo
effect. When using a single MOBILEMAN main unit, set the button to MONO. When using two MOBILEMAN main
units
together in stereo, set the button to STEREO.
4.
REVERB knob
- This knob adjusts the overall level of the reverb effect. To increase reverb, turn the knob clockwise.
To decrease reverb, turn the knob counter-clockwise.
5.
ECHO knob
– This knob adjusts the overall level of the echo effect. To increase echo, turn the knob clockwise. To
decrease echo, turn the knob counter-clockwise.
6.
REPEAT knob
- This knob is used to adjust the number of repetitions in the echo effect. When set to a minimum,
there will be no repetition of audio. As this knob is turned clockwise, more echo repetitions will occur.
7.
DELAY knob
- This knob is used to adjust the length of time between each echo repetition. When set to minimum,
the echo repetitions will occur rapidly, with little to no time between them. As this knob is turned clockwise, the
time between each repetition will increase.
8.
HISS knob
- This knob is used to reduce the amount of sibilance in the vocals when using effects. Turn the knob
clockwise to increase hiss filtering, and counter-clockwise to decrease hiss filtering.
0
L
R
MOBILEMAN
1
2
8
7
5
6
4
3
0
L
R
0
L
R
