16
Rear Panel
1.
SCART OUT
- Use this jack for connection to European TV systems.
2.
5.1/7.1 CHANNEL AUDIO OUTPUT
jacks - These jacks are for connecting to 5.1 or 7.1 channel
ready amplifiers/recievers. The labels on each jack specify which speaker in your surround sound
system output is sent to: ML- middle left, MR- middle right, CENT- center, SW- subwoofer, SL- side left,
SR- side right, FL- front left, FR- front right.
3.
COAXIAL OUTPUT
- This digital output is for connecting devices with a COAXIAL cable.
4.
COMPONENT VIDEO OUTPUT
- These jacks output VIDEO to a TV monitor via COMPONENT VIDEO
cables. COMPONENT VIDEO outputs the different color signals (U/Pb and V/Pr) and luminance signal
(Y) separately for high-fidelity in reproducing colors. The description of the component video out
put connectors may differ depending on the TV set or monitor i.e. Pr/Pb/Y or Cr/Cb/Y or R-Y/B-Y/Y.
Component video cables only transmit the video signal, separate cables are needed for audio signals.
Please refer to the operating instructions of the TV set or monitor for details.
5.
VIDEO (RCA) and S-VIDEO OUT
jacks - These jacks output video to a display device (TV, TFT, etc.). The
VIDEO jack outputs video using an RCA video cable. The S-VIDEO jack uses an S-VIDEO cable. S-VIDEO
provides better color separation and better resolution by separating the color and picture signals of a
composite-video signal.
6.
VGA
- For direct connection, using a VGA cable to an HDTV/VIDEO Monitor.
7.
OPTICAL OUTPUT
- This digital out is for connecting devices with an OPTICAL cable. Please make sure
to remove the protective cover from this jack prior to connecting an OPTICAL cable. When not using
this input, keep the protective cover on to protect it from dust and foreign material.
8.
VOLTAGE SELECTOR
- This selector toggles between 110-120V and 220-240V power settings. Please
make sure this toggle is set to the correct position, matching the receiving AC outlet’s power supply
before plugging it in and operating it. Doing so may cause severe damage to the unit and void your
product warranty.
9.
FUSE terminal
- This terminal houses the GIG-MASTER’s main system FUSE. NOTE: If fuse replacement
is necessary, only replace with the same type and rating of fuse.
www.vocopro.com
VIDEO
OUT
AUDIO
OUT
L
R
L
R
SPEAKER 8 Ω
AV1 INPUT
AV2 INPUT
VIDEO
L
R
VIDEO
L
R
L
R
BALANCED AUDIO OUTPUT
BALANCED MIC INTPUT
MIC 1
MIC 2
AC IN
INT
EXT
Speacker Selector
Power
MR
SW
SR
FR COAXIAL
V/Pb
S-VIDEO
OPTICAL
SL
FL
Y
U/Pb
VIDEO
CEN
ML
EFFECT LOOP
L-MUSIC-R
MIC
OUT
IN
SCART OUT
VGA OUT
9
3
4
1
8
5
7
6
2
