12 \
Functions:
Continues on page 13
All receiver and transmitter body:
Chg-
connect micro USB charging cable here to
recharge the internal battery.
Chg LED-
Red light indicates battery is low or
charging. Blue light indicates that battery status
is full after charging and has sufficient charge.
3.5mm jack-
connect a condenser microphone,
line in audio source
(CT only)
or connect
a headphone source here
(HR only)
.
Vol + /-
Transmission/reception volume level.
Power/Sync button-
press once rapidly to
power unit on, press once more to power unit
off. Press and hold this button when the unit is
on in order to change and re-sync the current
transmitting frequency channel.
Power LED-
a blue light means the unit is
powered on and operating.
Receivers:
Plug in MIC and Portable
RF LED-
this light shows when a radio
frequency is being received and confirms that
the receiver is connected to the transmitter
operating on the same frequency grouping.
(
HR only
- RF light must be solid and an audio
input signal must be present).
IT/GT3/
GT9/PR
HR and CT
Summary of Contents for Commander CT
Page 5: ...5 Devices Accessories not shown HT UR GT3 GT9 PR IT HR CT...
Page 8: ...8 Continues on page 9...
Page 9: ...9...
