18 \
Commander-HT, Commander-IT or
Commander-CT
• Plug 1/4" jack into a mic input connector.
• Press power button once to power ON.
• Check that the RF LED light is ON, this confirms
a solid connection.
• Adjust the output volumes to
your preference.
Commander UR
(wireless USB receiver)
• Insert UR into a computer or laptop (preferably
with USB 3.0 compatible port).
• Power on compatible transmitter (Commander
models: HT, IT or CT).
• Green LEDs should now be visible.
• Using a recording software or pre-installed
microphone recorder, on your computer’s
operating system, check for wireless audio
input reception.
Commander GT3/GT9
(wireless guitar transmitter)
• The commander GT3 or GT9 (wireless guitar/bass
transmitter) requires any of the corresponding
receiver models: Commander-HR, Commander-
PR, or Commander UR
• Plug the Commander GT3/GT9 directly into the
1/4
"
jack on you guitar or bass.
• Power ON by pressing the power button once.
Note: A blue power LED will now be visible.
• Adjust output volume on your instrument and
volume on the Commander GT3/GT9.
• Play instrument and verify that the AF LED lights
up to show the transmitter is receiving audio from
the instrument.
Summary of Contents for Commander CT
Page 5: ...5 Devices Accessories not shown HT UR GT3 GT9 PR IT HR CT...
Page 8: ...8 Continues on page 9...
Page 9: ...9...
