/ 17
Getting Connected Continued:
Commander HR
The Commander HR
(wireless portable receiver)
will
function with any of the corresponding transmitter
models: Commander-HT, Commander-IT or
Commander-CT*
• Connect a pair of headphones to the
3.5mm jack.
• Press power button once to power ON
• Check that the RF LED light is ON, this confirms
a solid connection.
• Adjust the output volumes to your preference.
Commander IT
The Commander-IT
(wireless instrument transmitter)
requires any of the corresponding receiver models:
Commander-HR, Commander-PR or
Commander-UR*
• Plug the Commander IT directly into a line output
connector on your instrument (keyboard,
guitar, etc.)
• Power ON the Commander IT by pressing the
Power Button once.
Note: A blue power LED light will now be visible
• Adjust output volume on your instrument and the
volume of the Commander IT.
• Play instrument and verify that the AF LED is
showing the Commander IT is in fact receiving
audio input signal.
Commander PR
The Commander-PR
(wireless plug-in mic receiver)
will function with any of the corresponding
transmitter models:
*Please reference the frequency groupings guide in the technical
specifications section of this manual for correct pairings.
Continues on page 18
Summary of Contents for Commander CT
Page 5: ...5 Devices Accessories not shown HT UR GT3 GT9 PR IT HR CT...
Page 8: ...8 Continues on page 9...
Page 9: ...9...
