Instruction Manual
11
PAGE
|
Note:
Any disinfectant residue should be thoroughly cleaned before resuming use.
2. TO DISINFECT (as needed)
1. Clean the mouthpiece and mask as instructed above
2. Add 3-6ml of warm water to the saline cup followed by 2-3 drops of white distilled vinegar and
nebulize. Do not inhale the vinegar solution. Ensure the mist does not come in contact with
surfaces that may be damaged by vinegar.
3. When the vinegar solution is gone, remove the saline cup from the nebulizer body and rinse the
interior of the cup.
4. Allow the saline cup to dry completely before reassembling.
5.
Clean the nebulizer exterior with a disinfecting wipe. Do NOT submerge the nebulizer body in
water.
6. Store your nebulizer and all components in a clean and dry place or your Carrying Case to avoid
dust, dirt, and damage.
