G901 User Guide Document: G901-2
----------------------------------------------------------------------------------------------------------------------------- ----------------
8
6
System Information
7
Select input port and set output resolution
➢
G901 has 5 input ports. System default input is HDMI-1.
➢
Remote control hotkeys can select only HDMI-1, HDMI-2 and DP-1 input ports. HDMI-3 and DP-2
shall be selected through OSD.
➢
User can select output resolution by remote controller for XGA, WXGA & 1080p only.
➢
There are 17 preset output resolutions and user can get into OSD menu to selected desired output
resolution through OSD: [Image Properties]
→
[ Output Mode]
→
Select output resolution
➢
All default output resolution is 60Hz, RGB 4:4:4 format and progressive.
➢
Input resolution is determined by signal source. G901 can support non-VESA standard input timing.
➢
User can click [Info] key to get system information and see input & output signal status.
➢
The input refresh rate should be the same as output refresh rate so that the system can implement
Frame Lock to synchronize all the outputs. If the input source is 50Hz with 60Hz output, then it is
possible to see some synchronization issue among multiple displays and frame conversion artifact.
Select input port Select output resolution and 10-bit deep color output
Main Input
status
PIP/POP
Input status
Output status
FW version
MCU code
version
Model #
