G901 User Guide Document: G901-2
----------------------------------------------------------------------------------------------------------------------------- ----------------
6
➢
When all boxes or IR extender receivers are installed together, user can control individual
unit through below method:
✓
To Press 851 number keys on remote controller will control only ID #1 GeoBox and
lock all others. User can see flashing LED on the Front Panel of the locked units.
✓
To Press 853 will only unlock ID # 3 GeoBox for further OSD operation.
✓
Press 850 will unlock all GeoBox OSD menu. Remote controller can access to all
GeoBox simultaneously.
3.7
RS232 Setting
➢
RS232 interface is designed with DB-9 connector. User can select 11520 or 9600 baud rate.
➢
The UART Protocol between GeoBox and a Host computer can be provided. The protocol
can be executed via RS-232, USB, Ethernet or other forthcoming communication methods.
➢
Please execute RS232 setting through OSD, WebGui or UWM.
3.8
Ethernet setting
➢
User needs to connect G901 to WiFi Router or switch/hub through RJ45 to LAN port. Then
user can control the system through Ethernet.
➢
UTP cable can be used for direct connection between PC and GeoBox. User needs to set
PC TCP/IPv4 with the same domain segment as GeoBox (for instance, to set IP address at
(192.168.0.105) and subnet mask at (255.255.255.0).
➢
Open web browser (Google Chrome or Internet Explorer) and input G901 IP address
(default is 192.168.0.100), user can see GeoBox WebGui and menu with virtual keys similar
to OSD for further system operation. There is no additional software is required.
➢
If user can’t connect the network, please power off/on G901 again to let PC detect G901
network system.
➢
User can set DHCP for the connection. If necessary, please [Renew] DHCP to get IP
address before network connection.
➢
UWM PC Tool is another web tool that has full function for system setting and operation. It
can also update Firmware or MCU code. UWM can be downloaded from VNS website.
➢
Each G901 can set different IP address for independent operation and control.
➢
Please use < > OSD keys to select OSD menu items and use
˄ ˅ OSD keys to change IP
address.
➢
If G901 is connected with WiFi Router (through LAN port), user can control G901 through
WiFi via PC, iPad or mobile phone.
➢
Default Telnet port is 23 and TCP server port is 1266.
