G406L User Guide Document: G406L-2
----------------------------------------------------------------------------------------------------------------------------- ----------------
29
-
[Profile]
→
[Load]
→
[Index]
-
[Options]
→
[Setting]
→
[Box ID]: one G406L has one Box ID and can only be set by CH1 or CH2.
-
[Options]
→
[Setting]
→
[Mute]
-
[Options]
→
[Setting]
→
[Network]: one G406L has one Network setting and can only be set by
CH1 or CH2.
➢
The following commands will be applied to Processor-1 and Processor-2 separately. The commands
will apply to two channels inside the same Processor.
-
[Image Properties]
→
[Scaling]: select full screen or original aspect ratio
-
[Image Properties]
→
[Output Mode]: select output resolution & set 10-bit output mode.
-
[Options]
→
[Information]: show system information
-
[Options]
→
[Language]: select OSD language
-
[Options]
→
[Reset]
-
[Options]
→
[Accessibility]
→
[OSD Time Out]
-
[Options]
→
[Accessibility]
→
[Logo Time Out]
-
[Options]
→
[Accessibility]
→
[Standby Time]
-
[Options]
→
[Accessibility]
→
[Black Screen]
-
[Options]
→
[Setting]
→
[Mute]
-
[Options]
→
[DVI Output]
-
[Options]
→
[Frame Sync]
-
[Options]
→
[Setting]
→
[Profile]
→
[Save]
-
[Options]
→
[Setting]
→
[Profile]
→
[Load]: If through below OSD operation ([Menu]
→
[Setting]
→
[Profile]
→
[Load], the result will apply to CH1/2 or CH3/4 but not all channels. If via [Profile]
hotkey on front panel or remote controller to Load Index, the result will apply to all channels at
the same time.
➢
The following commands will be applied to each channel independently.
-
Color adjustment: All menu under [Picture]
-
[Image Properties]
→
[ Color]
-
[Image Properties]
→
[Orientation]
17. Miscellaneous features
17.1. EDID Setting
➢
[Options]
→
[Setting]
→
[EDID]. [Customize] EDID is in the selection list. The range is H= 1024~3860,
V= 720~2400.
➢
HDMI: select CH1 or CH2 with HDMI input, then to set EDID
➢
User can set EDID directly through WebGui and UWM by selecting input port.
17.2. HDMI vs. DVI Output Signal
