G406L User Guide Document: G406L-2
----------------------------------------------------------------------------------------------------------------------------- ----------------
28
15.2. UHDWall Manager (UWM) PC Tool
➢
UWM Manager is a PC tool executed through PC. User needs to download this tool from VNS
website. Once user connects G406L with PC through Ethernet or USB and open UWM Manager, user
can access UWM and execute all operation similar to OSD menu through PC keyboard and mouse.
User can backup system setting in PC and restore/copy to other units.
➢
UWM is for system setup and can’t read back the settings parameters from GeoBox.
➢
UWM PC tool is designed for G400 series product. If user connects with G408, user will see 8
channels for selection instead of 4 channels.
➢
User can execute full operation functions and also update Firmware and MCU code through UWM.
User can control multiple units at the same time through change IP address.
The color icons on the top of CH indicator is to show the system connection status. Green indicates
that the channel has connected with display device and input LED indicates that input signal is
connected. In the above example, channel 4 output is not connected with monitor.
16. System Structure and Operation behavior
Please see detailed block diagram of G406L on page 6.
16.1. System Structure: Display Processor 1-2
➢
G406L has two processors. Each processor controls two output channels.
16.2. OSD Command Execution in each processor.
➢
The following command will be applied to all channels at the same time.
