G406L User Guide Document: G406L-2
----------------------------------------------------------------------------------------------------------------------------- ----------------
23
TV1: increase [Overlap] value in Bottom Edge to move Horizontal center line up to video wall center
TV2: increase [Overlap] value in Left Edge to move Vertical center line right to video wall center.
TV3: increase [Overlap] value in Right Edge to move Vertical center line left to video wall center.
TV4: increase [Overlap] value in Top Edge to move Horizontal center line down to video wall center.
➢
Step 5: Individual monitor position adjustment based on Horizontal and Vertical Position Reference
resulting from the previous step 4.
TV1: increase [Overlap] value in Left Edge and decrease [Overlap] value in Right Edge to align Vertical
lines to match TV3
TV2: increase [Overlap] value in Top Edge and decrease [Overlap] value in Bottom Edge to align
Horizontal lines to match TV1
TV3: increase [Overlap] value in Bottom Edge and decrease [Overlap] value in Top Edge to align
Horizontal lines to match TV4
TV4: increase [Overlap] value in Right Edge and decrease [Overlap] value in Left Edge to align Vertical
lines to match TV2
➢
Step 6: After final image position, all horizontal and vertical pattern can be matched together. The
setup procedure is finished.
✓
Horizontal Position Reference is
determined by TV2 & TV3 and Vertical
Position Reference is determined by TV1
& TV4.
✓
Once user can line up the image center
to Video wall center H&V lines, it can
serve as Position Reference lines.
✓
Left figure shows the result after setting
Horizontal and Vertical Position
Reference (Move TV1 center line up,
TV2 center line to Right, TV3 center line
to Left and TV4 center line to down
—
please see the arrow direction)
