G406L User Guide Document: G406L-2
----------------------------------------------------------------------------------------------------------------------------- ----------------
17
11.3.
Load/Save Profile Index through WebGui and UWM PC Tool
➢
Profile [Load] and [Save] button under [System] menu is available to Load and Save profile
settings.
➢
Load and Save will apply to all channels at the same time.
12. System Reset
User can rest system through below method:
➢
User small pin to insert RESET hole at back panel for 5 seconds, user will see [Reset to Default]
message. It will apply to all channels at the same time. It will also delete the data saved in Profile
Indexes.
➢
OSD menu to reset the system will only be functional for one Processor--two channels.
➢
User [Reset] hotkey on remote controller will reset one Processor (two channels) at the same time.
➢
When operating through OSD or remote controller, user can select to reset [Reset All] or only reset
[Video Wall setting] setting.
➢
Reset through [Reset] hole on the back panel will clean [Profile Index] settings.
➢
Reset through [Reset] hotkey on the remote controller or OSD menu, [Profile Index] settings will
not be deleted.
13. Irregular / Asymmetric Video Wall Settings
13.1. Introduction
➢
Asymmetric video wall can be created by rotating monitor installation direction or position. User
can crop different area image for each monitor, rotate image direction and adjust image position
through G406 to achieve it.
Note: Image flip and rotation are only available when input resolution is under 4k/2k @30Hz.
Load
Index
Hotkey
Number
key
