VNS CCTV VNS-9800MW User Manual Download

Page: 19 / 34

18/ 36

Motion alarm set: included schedule time, switch of the alarm, sensitivity, alarm output, alarm

record or alarm snap sending by FTP.And snap sending by email. (Default storage SD card without

selecting email or FTP)

【

Schedule Set

】

set the two schedule times for motion alarm detection.

【

Alarm output

】

alarm signal output.

【

Alarm output duration

】

set the time from 0~86400 seconds.

【

】

send alarm message by email.

【

Snap

】

set alarm snapped picture sending by email or FTP. If there are continuous alarms, the

interval time of capturing is the duration time.1 snapped picture per 1 second.

【

Record

】

set alarm record sending by FTP

【

Area set

】

Press the left button of mouse and drag to the detected area. Four areas can be set.

【

All

】

Set whole area as detected area

【

Clr

】

Clear all detected area.

After setting, click the

【

save

】

button.

4.6 Sensor alarm

Sensor alarm set

：

Sensors alarm set: included schedule time, switch of the alarm, sensitivity, alarm output, alarm

record or alarm snap sending by FTP.And snap sending by email. (Default storage SD card without

selecting email or FTP)

【

Schedule Set

】

set the two schedule times for motion alarm detection.

【

Alarm output

】

alarm signal output

【

Alarm output duration

】

set the time from 0~86400 seconds.

【

】

send alarm message by email.

Summary of Contents for VNS-9800MW



































Search results

Summary of Contents for VNS-9800MW

Reviews:

Related manuals for VNS-9800MW

Brands by name

Popular brands

VNS CCTV VNS-9800MW, User Manual

Search results

Summary of Contents for VNS-9800MW

Reviews:

Related manuals for VNS-9800MW

Brands by name

Popular brands