6/ 36
Step1: Connect power supply (DC 12V)
Step2: Connect LAN port with router/network switch/ hub via RJ45 cable.
2.2.2 Connect LAN port with PC via RJ45 cable.
The Light of LAN port turns green within 5 seconds under the normal network situation after power
on.
3 Searching device and installing ActiveX
3.1 Searching device and modify network parameters
Run “Ricerca Dispositivo” to find the default IP and modify mega pixel ip camera network
parameters according to clients’ local PC IP gateway (Such as IP address, subnet mask, gateway
and so on)
How to run “Ricerca Dispositivo”,
A: Find the VNSManager software in
【
Application
】
file from the CD.
B: Install the VNSManager software, then do it as follows to find Ricerca Dispositivo:
【
Start
】
---
【
all programs
】
---
【
VNSManager
】
---
【
Ricerca Dispositivo
】
.
Note
：
1. The factory settings of the IP Camera as follows IP: 192.168.55.160; Subnet mask:
255.255.255.0.
2. User name: admin; Password: admin
3. Run the Ricerca Dispositivo software to search and modify IP Camera network parameters .It is
multicast protocol. But the firewall forbids the multicast data packet. So please close the firewall
first.
(1)Click
【
【
【
【
Ricerca Dispositivo
】
】
】
】
button to run Ricerca Dispositivo software as
follow:
【
Local IP
】
Display the local PC IP. If your PC is NIC or multi-addressed local IP, please select one
