VMI VIBER X5 MKIII, Instrument Manual, Page: 116 / 121

116
11.1 Accelerometers
Vibration transducer, with built in amplifier
Internally shielded and case isolated.
Technical specifications for VMI192
Sensitivity (+/-10%) 100mV/g
Frequency response (±3dB) 0.4–13000Hz
(±10%) 1.0-9000Hz
Dynamic Range ±80 g, peak
Sensing Structure Shear Mode
Internal resonance 26000Hz
Settling time <2 Seconds
Bias Voltage 10-14VDC
Electrical Case Isolation >10
8
ohm
Temperature range -50 to 121 °C
Maximum Shock Protection 5000 g, peak
Electromagnetic Sensitivity CE-Certified
Sealing Hermetic Welded
Weight (without magnet) 51 grams
Case Material 316L Stainless steel
Mounting ¼-28 Tapped Hole
Mounting stud M6 Adapter stud
Mounting Torque 2.7-6.8 Nm
M6 pin
bolt
Cable connector
Measuring
direction
Extension tip
Magnet, force 200N
Note! Use of the Magnet will reduce the linear frequency response to 2000-4000Hz
depending on the surface structure of the measuring point.
Use of the Extension tip will reduce the linear frequency response to 1200-2000Hz
depending on the surface structure of the measuring point.
Only use the extension tip at otherwise inaccessible points.