VMI VIBER X5 MKIII, Instrument Manual, Page: 115 / 121

115
11. Technical Specification
Digital
DSP Processor
Texas TMS320C6713B
Memory
Storage: 4GB micro SD
128MB Ram
2x 16 MB fast flash RAM
Actual Spec is dependent
on hardware revision.
ADC
16 bit, max 192 KSPS simultaneous
sampling
Display
Size & Resolution
4.3” Amorphous TFT-LCD
480x272 pixels
Colours
65536
Signals In/Out
AC Inputs
All standard ICP accelerometers
(4mA/24V), velocimeters or general
purpose AC transducers in range 0-8V
RMS. Auxiliary inputs with range 0-30V
RMS.
VMI default transducers
are automatically detected
DC Inputs
0 to 5V
External
Reference
0.8 to 24V
Signal Generator
Function
Amplitude: 0 to 4.7Vp-p
Frequency: 4 to 1kHz
Sweep and step
Generation software
dependent
Built-in
Transducers
Temperature
-10 to 120⁰C Infrared
Tachometer
Up to 60000rpm 0.1 to 2m range
Measurements
Processing
Direct, single or double integrated or
deviated (configured in software upon
used transducer and user request). Up
to 3 channels simultaneous sampling
Frequency Range
0.5 to 32kHz Transducer dependent
Amplitude Range
0 to 80g Transducer dependent
Accuracy
0.001g ± 1% for non integrated
0.1mm/s ± 2% for single integrated
2µm ± 3% for double integrated
FFT Lines
25600
Sampling Rate
Up to 131072Hz dependent on selected
frequency range
3 channels simultaneous
sampling
Windowing
Selectable: Hanning, Hamming,
Blackman, Kaiser-Bessel
Power
Accumulators
6.2 Ah Li-ion fule gauge smart battery
pack
Autonomy
12 hours continuous use
Charging
4 hours for full charge
Temperature
Operating
-20 to 70⁰C(-4 to 158⁰F)
Storage
-30 to 80⁰C(-22 to 176⁰F)