VMI VIBER X3, Manual, Page: 6 / 60

Vibraon Measurement Instruments
4
2 Introduction
VIBER X3™ is designed for maintenance/repairer and operators personnel. It is an excellent
tool, for basic condition monitoring checks, easy to use and reliable for status analyse. The VI-
BER X3™ instrument has the following features:
• Accurate measurements in 4 selectable frequency ranges.
Gives higher reliability.
• Real-time measurement of the total vibration level and the Bearing
Condition (BC), measures and displayed simultaneously, facilitate
analysis of Bearing faults.
• Headphone set with volume control and high pass filter for Bearing noise detection.
Can be used without BC measuring and trending, to save time. Uses if there are many
small Bearings as in printing machines or conveyors and similar applications.
• Listening to bearing sound while comparing the displayed BC value.
• Fast and easy fault analysis screen displaying the five highest peaks
with amplitude and frequency one by one.
• Measurement units and measurement presentation may be selected by
the user from the following list:
• g-value = (RMS, Peak or Peak-Peak)
• a = m/s
2
(RMS, Peak or Peak-Peak)
• V = mm/sec (RMS, Peak or Peak-Peak)
• V = inch/sec (RMS, Peak or Peak-Peak)
• D = mils (RMS, Peak or Peak-Peak)
• D = μm (RMS, Peak or Peak-Peak)
• Bearing Condition measurements in a wide frequency range (0, 5 - 16 kHz).
• Built-in infrared temperature sensor, units in °C or °F.
• Bar indicator shows measurement stability.
• Vibration, temperature and danger alarms by red and yellow colour LED’s.
• Fast battery charging capacity using an external charger, provided in the delivery.
• Display with backlight.
• Adjustable Auto-shut off for energy saving.
• Dust and waterproof, for rough use (IP 65).