VMI VIBER X3, Manual, Page: 55 / 60

Vibraon Measurement Instruments
53
Note 1
Note 2
Note 3
Note 4
Note 4a
Note 4b
Note 5
Note 6
Note 7
Note 8
Note 9
User selectable, between Hz and RPM.
User selectable.
Same as ”frequency range”, except for 11-3200 Hz range,
where peak detection ands at 2000 Hz.
Full scale is 50g for acceleration other units are frequency
dependent.
Over 0.03 gBC.
Emissivity factor must be set in accordance with the target
surface.
Capacity of the batteries can vary depending on hardware
revision. Max 2300 mAh. (storage temp. -20 to max 60°C).
Operating time depends on backlight, volume level and bat
-
teries used. Backlight adds 40mA and the sound volume up
to 150 mA. Charging time is approx: 6-12 hours.
Operating temp. min 0°C to max 50°C, storage temp. max
72°C.
The restriction concerns display.
Instrument, including battery and transducer.
OBS.
If you can change to another accelerometer, then you have
to change the senstivity (mV/g). This is done in the menu
under ”Transducer”.