灯具使用说明书
第
4
页
Figure 4 Value setting page
Value Settings：
You can directly pull the slider to set the required value quickly, or you
can click the right "Up" or "Down" button to set the required value precisely or use
auxiliary input to set it.
Apply Value：
When the data is set by the "Up" or "Down" button, and the "Apply"
button in the lower left corner is pressed, the value is immediately sent to the fixture,
but the value is not saved.
Vale Save：
Click the "OK" button in the lower right corner to save the current value to
the internal memory and apply the saved value to the fixture at the next boot.
3.
Setting Boolean Parameters
When the parameter set is a Boolean value (such as ON or OFF), you can directly click
the corresponding item to switch the parameter value. This type of parameter will be
saved to the internal memory after modification. Press the parameter option on the
right, the corresponding option will be grayed out. When you release your hand, the
corresponding parameters will be changed and saved. If pressing the parameter option
is not the parameter you want to change, you can move your finger to another part of
the screen at this time, and the corresponding parameter will not change.
The determination of important Boolean parameters will be set through the
determination window, as shown in Figure 5 below:
Figure 5 Confirm input window
Summary of Contents for LX-300
Page 21: ...灯具使用说明书 第 19 页 ...
Page 22: ...灯具使用说明书 第 20 页 ...
