VLTG LX-300, User Manual

Page: 12 / 22

灯具使用说明书
第
10
页
Bulb failure Bulb accidentally extinguished
Sensor failure The temperature sensor signal is abnormal
Fan failure Main fan is not working properly
Lighting
status
Display key status data of current light for reference
Communicatio
n
0~100%, Communication quality of the data link inside the
luminaire
Error count Total number of error frames detected after power-on,
cumulative
Light source
temperature
Display the current temperature of the light source, "---"
means no detection
Display board
temperature
Display the current temperature of the display board or the
surrounding ambient temperature
Sensor 1
temperature
Display the current motherboard temperature or the ambient
temperature of the motherboard installation location
Version
Information
Display the information and version of the current light, an important reference for
after-sales maintenance
device The name of the light, the same as the equipment information
of RDM
model Model of the lamp, same as the model information of RDM
display board Display board fixed version and serial number
Motherboard 1 Fixed version and serial number of motherboard 1
Light source
time
Record the total accumulated elapsed time when the light source is turned on,
unit is minutes. The user manually clears it as a time reference for the regular
maintenance of the light source.
Light time Record the total accumulated elapsed time for lighting which cannot be cleared.
Unit is minutes
Chapter 3 Channel Description
1. Channel Table
This lamp channel can be viewed in the scene mode. The channel mode is set in the
"Address Settings" page. The detailed data is shown in the following table:
Channel Name Value Description
CH1
X axis
0-255 0-540°
CH2
Y axis
0-255 0-270°
CH3
X-axis
fine-tuning
0-255 0-2°