Vlano 100VAIR, Operating Manual

Page: 8 / 20

DE
ADJUSTING THE FAN
: Turn the rotary knob of the potentiometer to adjust the humidity setpoint H clockwise to increase the
switch-on humidity and counterclockwise to reduce it accordingly (from 60% to 90%).
: Switching on and setting the interval timer is done with the potentiometer T
i
To switch off the interval timer
.
adjust the potentiometer T
i
in the far left position. Turning the potentiometer 1/3 clockwise sets the duration of
interval operation to 6 hours, turning it 2/3 to 12 hours and turning it to
rightmost position on 24 hours.
: To set the delay time, turn the rotary knob of the potentiometer T
off
clockwise to increase the delay time
and counterclockwise to reduce it accordingly (from 2 to 30 minutes).
Caution: If the switch switches off again within 60 seconds after the switch or the humidity sensor has
been triggered or the room humidity falls below the setpoint, the fan continues to run at the low
ventilation level.
DO NOT USE METAL SCREWDRIVERS, KNIVES, OR
OTHER SHARP OBJECTS TO DAMAGE THE CONTROL BOARD.
A plastic screwdriver for setting the fan
parameters is included in the scope of delivery.
Use this to set the switch-on duration, follow-up
time or switch-on humidity.
H
for ТH
60%
90%
T
i
for Т
O
24 hour
T
O
for Т / TH
2 min
30 min
8th